How to maintain and care for Veneered Birch Plywood products

Regular cleaning: Keeping polyester veneer birch plywood products clean is the basis for maintaining their beauty and extending their service life. Use a soft damp cloth or microfiber cloth to gently wipe the surface to remove dust and fine stains accumulated during daily use. For stains that are more difficult to remove, it is recommended to use a neutral, non-corrosive detergent and dilute it according to the product instructions. Do not use detergents containing acids, alkalis or abrasives to avoid damaging the surface gloss and protective layer of the PET film. After cleaning, be sure to wipe it again with clean water and wipe it dry with a clean cloth to avoid water stains.
Waterproof and moisture-proof: Although polyester veneer birch plywood has a certain degree of water resistance, long-term contact with water or being in a humid environment may still have an adverse effect on it. Therefore, in daily use, try to avoid direct contact between water and the surface of the board, especially avoid long-term soaking or large amounts of splashing. When used in areas with high humidity such as bathrooms and kitchens, more attention should be paid to ventilation to reduce water vapor accumulation. At the same time, regularly check and clean the drainage system to ensure that there is no water accumulation.
Avoid scratches: The surface of polyester veneer birch plywood is covered with a layer of PET film. Although it has good wear resistance, it is still necessary to avoid direct scratches from sharp objects or heavy objects. When moving furniture, placing decorations or performing daily cleaning, auxiliary tools such as cushions and protective covers should be used to reduce friction and impact on the surface of the board. At the same time, for minor scratches or wear that have already appeared, timely measures should be taken to repair them to prevent the problem from expanding and affecting the overall appearance.
Avoid direct high temperature: Long-term exposure to high temperature or strong sunlight will cause the PET film on the surface of polyester veneer birch plywood to fade, deform or even crack. Therefore, when arranging furniture or choosing an installation location, try to avoid areas with direct sunlight. If it cannot be avoided, shade facilities such as curtains and blinds can be used to block it. At the same time, during the high temperature period in summer, cooling equipment such as air conditioners or fans can be turned on to keep the indoor temperature appropriate.
Regular inspection and repair: In order to ensure the long-term use of polyester veneer birch plywood products, regular inspection and maintenance should be carried out. The inspection content includes whether there are scratches, wear or fading on the surface of the board; whether the edges and joints are firm and not loose; and whether there are deformation or cracking problems. For any problems found, timely measures should be taken to repair them. For minor scratches or wear, you can use a repair pen or repair paste similar to the color of the board to repair; for larger damage or deformation problems, you need to ask professionals to repair or replace them.
Proper storage: When storing polyester veneer birch plywood products, ensure that the environment is dry, ventilated and avoid direct sunlight. At the same time, avoid stacking heavy objects directly on the board to avoid deformation or damage. If it is not used for a long time, it should be covered and protected with a dust cover or cloth cover to reduce the accumulation of dust and dirt. In addition, during storage, care should be taken to avoid direct contact with chemicals to prevent chemical reactions from causing deterioration or damage to the board.
Professional maintenance: For large or high-value polyester veneer birch plywood products, such as custom furniture or high-end building decoration materials, regular professional maintenance is recommended. Professional maintenance services usually include deep cleaning, surface polishing, waterproofing, and necessary repair work. Professional maintenance can ensure that the surface of the board always remains as bright and clean as new, while enhancing its durability and anti-aging ability. When choosing professional maintenance services, you should choose a service provider with rich experience and a good reputation to ensure the maintenance effect and quality.